Tag pelatihan fluid flow – gas metering and custody transfer pasti jalan

training HYPNO IN SELLING,pelatihan HYPNO IN SELLING,training HYPNO IN SELLING Batam,training HYPNO IN SELLING Bandung,training HYPNO IN SELLING Jakarta,training HYPNO IN SELLING Jogja,training HYPNO IN SELLING Malang,training HYPNO IN SELLING Surabaya,training HYPNO IN SELLING Bali,training HYPNO IN SELLING Lombok,pelatihan HYPNO IN SELLING Batam,pelatihan HYPNO IN SELLING Bandung,pelatihan HYPNO IN SELLING Jakarta,pelatihan HYPNO IN SELLING Jogja,pelatihan HYPNO IN SELLING Malang,pelatihan HYPNO IN SELLING Surabaya,pelatihan HYPNO IN SELLING Bali,pelatihan HYPNO IN SELLING Lombok

TRAINING FLUID FLOW – GAS METERING AND CUSTODY TRANSFER

TRAINING FLUID FLOW – GAS METERING AND CUSTODY TRANSFER

Training Aliran Fluida

Training Pengenalan Alira Fluida

training aliran fluida murah

TRAINING OBJECTIVE :
This course is developed for engineers and technicians who need to have a practical knowledge of selection, installation and commissioning of fiscal metering equipment. It is for those primarily involved in achieving effective results in industrial processes. This would involve the design, specification and implementation of control and measurement equipment. The course focuses on practical applications, with special attention to installation considerations and application limitations when selecting or installing different measurement or control instruments for fiscal metering.

TRAINING MATERIAL OUTLINE :
1. Basic Fluid Flow:
   * Fluid property
   + Density
   + Viscosity
   + Surface tension
   + Modulus elasticity
   * Compressible & Incompressible flow
   * Fluid Flow
   + Continuity Equation
   + Bernoulli Equation
   * Pipe fluid flow
   * Fluid Flow Measurement

2. Performance Characteristic of Flowmeter
   * Accuracy
   * Repeatability
   * Performance Measure
   * Calculation

3. Head Flow Meter
   * Orifice
   * Sizing
   * Secondary Instrument
   * Calculation
   * Standard AGA3

4. Turbine Meter
   * Systems
   * Properties
   * Characteristics
   * Standard AGA7

5. Ultrasonic Flowmeter
   * Ultrasonic Flowmeter
   * Types
   * Application
   * Standard AGA9

6. Oil Transfer Meter:
   * Meter Run
   * Proving Skid
   * Meter Proving
   * Meter Factor
   * Base Prover
   * Proving Run
   * Prover Pass
   * Prover Round Trip
   * Proving Counter

7. Shipping Calculate Volume & Calculate Correction:
   * Temperature material
   * Pressure material
   * Oil Temperature
   * Oil Pressure
   * Sediments and water
   * Calculate Meter Factor

8. Retroactive Meter Factor
   * Manual retroactive factor

9. Calculation Sample:
   * Flow calculation
   * Oil Quantity measurement

10. Use Measurement Systems in MIGAS Activities

WHO SHOULD ATTEND THIS TRAINING?
   * Instrumentation Engineers & technicians
   * Design & Process Engineers
   * Operation Engineer
   * Well testing group
   * Production Operation
   * Reservoir Engineering & technicians
   * Maintenance Superintendent & Supervisor

TRAINING INSTRUCTOR
Dr. Ir. Endra Joelianto is an expert in control engineering. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust PID Controller, Advanced Process Control, Industrial Automation using PLC/DCS. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosophy (PhD.) in Control Engineering in 2001 from Department of Engineering,The Australian National University, Australia.

He is coordinator of Intelligent Control and Automation, and founder of PLC Research Group, Laboratorium Instrumentasi dan Kontrol (LINK), Departemen Teknik Fisika, Institut Teknologi Bandung. He was the founder and the director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung.  The Schneider-OMRON PLC Training Center has cooperation with PT. Schneider Electric Indonesia, PT. OMRON Corporation Japan, Invensys WONDERWARE. He was the project leader for TPSDP Retooling Program Batch II-DIKNAS for Training Program on “INDUSTRIAL AUTOMATION USING PLC” 2004 and Co-provider for the same retooling program Batch II on “INDUSTRIAL CONTROL AND AUTOMATION” by PT. Cahaya Sumirat, Bandung. In 2005, he leads the retooling project entitled PLC for Industrial Control and Automation at the Department of Engineering Physics, ITB

He attended several professional trainings on PLC, DCS and Instruments Calibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advance PLC OMRON, Jakarta (2004), Cleaner Production: Application in Industries, University of Kwazulu-Natal, South Africa-ITB, Bandung (2005). Advanced Process Control, ASPEN Tech., Jakarta, (2005)

He serves as instructor either for public, universities or in-house training on instrumentation and process control to universities, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Petrokimia Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PT. ALSTOM Indonesia, PERTAMINA, British Petroleoum, Maxus, Amoseas, PT. Nusa Halmahera Mineral, PT. Indonesia Jaya Power, Indonesia Power-Paiton, PT. Riau Pulp and Paper, Indonesian Cement and Concrete Institut (ISBI), LIPI-Bandung, LAPI-ITB, POLMAN-Bandung, etc.

Jadwal

training fluid flow – gas metering and custody transfer terbaru

:

§ 23 sd 24 Januari 2019

§ 13 sd 14 Februari 2019

§ 20 sd 21 Maret 2019

§ 17 sd 18 April 2019

§ 28 sd 29 Mei 2019

§ 25 sd 26 Juni 2019

§ 16 sd 17 Juli 2019

§ 15 sd 16 Agustus 2019

§ 17 sd 18 September 2019

§ 22 sd 23 Oktober 2019

§ 20 sd 21 November 2019

§ 19 sd 20 Desember 2019

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Biaya dan Lokasi training fluid flow – gas metering and custody transfer terupdate :

Lokasi :

Yogyakarta, Hotel Dafam Malioboro (6.000.000 IDR / participant)

Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)

Bandung, Hotel Golden Flower (6.500.000 IDR / participant)

Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)

Lombok, Hotel Jayakarta (7.500.000 IDR / participant)

Catatan : Biaya diatas belum termasuk akomodasi/penginapan.

Investasi training pengenalan alira fluida murah :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training konsep fluid flow murah :

1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)

2. FREE Akomodasi Peserta ke tempat pelatihan .

3. Module / Handout training aliran fluida terupdate .

4. FREE Flashdisk .

5. Sertifikat training fluid flow – gas metering and custody transfer terupdate .

6. FREE Bag or bagpackers (Tas Training) .

7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc) training pengenalan alira fluida terbaru .

8. 2xCoffe Break & 1 Lunch, Dinner .

9. Souvenir .

training Electronic Document Management System jakarta, training EDMS jogja, training Document surabaya, training Electronic Document bandung, pelatihan Electronic Document Management System lombok,

TRAINING FLUID FLOW – GAS METERING AND CUSTODY TRANSFER

TRAINING FLUID FLOW – GAS METERING AND CUSTODY TRANSFER

Training Aliran Fluida

Training Pengenalan Alira Fluida

training aliran fluida murah

TRAINING OBJECTIVE :
This course is developed for engineers and technicians who need to have a practical knowledge of selection, installation and commissioning of fiscal metering equipment. It is for those primarily involved in achieving effective results in industrial processes. This would involve the design, specification and implementation of control and measurement equipment. The course focuses on practical applications, with special attention to installation considerations and application limitations when selecting or installing different measurement or control instruments for fiscal metering.

TRAINING MATERIAL OUTLINE :
1. Basic Fluid Flow:
* Fluid property
+ Density
+ Viscosity
+ Surface tension
+ Modulus elasticity
* Compressible & Incompressible flow
* Fluid Flow
+ Continuity Equation
+ Bernoulli Equation
* Pipe fluid flow
* Fluid Flow Measurement

2. Performance Characteristic of Flowmeter
* Accuracy
* Repeatability
* Performance Measure
* Calculation

3. Head Flow Meter
* Orifice
* Sizing
* Secondary Instrument
* Calculation
* Standard AGA3

4. Turbine Meter
* Systems
* Properties
* Characteristics
* Standard AGA7

5. Ultrasonic Flowmeter
* Ultrasonic Flowmeter
* Types
* Application
* Standard AGA9

6. Oil Transfer Meter:
* Meter Run
* Proving Skid
* Meter Proving
* Meter Factor
* Base Prover
* Proving Run
* Prover Pass
* Prover Round Trip
* Proving Counter

7. Shipping Calculate Volume & Calculate Correction:
* Temperature material
* Pressure material
* Oil Temperature
* Oil Pressure
* Sediments and water
* Calculate Meter Factor

8. Retroactive Meter Factor
* Manual retroactive factor

9. Calculation Sample:
* Flow calculation
* Oil Quantity measurement

10. Use Measurement Systems in MIGAS Activities

WHO SHOULD ATTEND THIS TRAINING?
* Instrumentation Engineers & technicians
* Design & Process Engineers
* Operation Engineer
* Well testing group
* Production Operation
* Reservoir Engineering & technicians
* Maintenance Superintendent & Supervisor

TRAINING INSTRUCTOR
Dr. Ir. Endra Joelianto is an expert in control engineering. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust PID Controller, Advanced Process Control, Industrial Automation using PLC/DCS. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosophy (PhD.) in Control Engineering in 2001 from Department of Engineering,The Australian National University, Australia.

He is coordinator of Intelligent Control and Automation, and founder of PLC Research Group, Laboratorium Instrumentasi dan Kontrol (LINK), Departemen Teknik Fisika, Institut Teknologi Bandung. He was the founder and the director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung.  The Schneider-OMRON PLC Training Center has cooperation with PT. Schneider Electric Indonesia, PT. OMRON Corporation Japan, Invensys WONDERWARE. He was the project leader for TPSDP Retooling Program Batch II-DIKNAS for Training Program on “INDUSTRIAL AUTOMATION USING PLC” 2004 and Co-provider for the same retooling program Batch II on “INDUSTRIAL CONTROL AND AUTOMATION” by PT. Cahaya Sumirat, Bandung. In 2005, he leads the retooling project entitled PLC for Industrial Control and Automation at the Department of Engineering Physics, ITB

He attended several professional trainings on PLC, DCS and Instruments Calibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advance PLC OMRON, Jakarta (2004), Cleaner Production: Application in Industries, University of Kwazulu-Natal, South Africa-ITB, Bandung (2005). Advanced Process Control, ASPEN Tech., Jakarta, (2005)

He serves as instructor either for public, universities or in-house training on instrumentation and process control to universities, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Petrokimia Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PT. ALSTOM Indonesia, PERTAMINA, British Petroleoum, Maxus, Amoseas, PT. Nusa Halmahera Mineral, PT. Indonesia Jaya Power, Indonesia Power-Paiton, PT. Riau Pulp and Paper, Indonesian Cement and Concrete Institut (ISBI), LIPI-Bandung, LAPI-ITB, POLMAN-Bandung, etc.

Lokasi Pelatihan Tahun 2021 :

Yogyakarta, Hotel Dafam Seturan

Jakarta, Hotel Amaris La Codefin Kemang

Bandung, Hotel Grand Serela Setiabudhi

Bali, Hotel Ibis Kuta

Lombok, Hotel Jayakarta

Catatan :

  • Waktu pelatihan Dua+1* hari dengan Biaya tersedia untuk Perorangan, Group, dan Inhouse Training, belum termasuk akomodasi/penginapan.
  • Untuk biaya dan jadwal training harap menghubungi marketing kembali

Investasi training:

Investasi pelatihan selama dua hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training:

Free Penjemputan dari bandara ke hotel*.

Modul / Handout.

Flashdisk*.

Certificate of attendance.

FREE Bag or bagpacker.

Training Kit (Photo Documentation, Blocknote, ATK, etc).

2x Coffe Break & 1 Lunch.

Souvenir .

Copyright © 2022 | Powered by Sinaran Training | Training Provider
Tanyakan pada kami ?

Kami di sini untuk membantu Anda! Jangan ragu untuk menanyakan apapun kepada kami. Klik di bawah untuk memulai obrolan.

Admin

Aryo

Online

Aryo

Hai, tanyakan pada kami ? 00.00