TRAINING ONLINE PROGRAMMABLE LOGIC CONTROLLER USING SIEMENS S7- 400 *SERTIFICATE BY SIEMENS*

TRAINING WEBINAR PLC USING SIEMENS S7-400

TRAINING PENGENALAN PLC UNTUK PRAKERJA

pelatihan Programmable Logic Controller Using Siemens S7- 400 *Sertificate by Siemens* online

Introduction pelatihan PLC using Siemens s7-400 online

This section will begin with a discussion of basic theory of operation
and  how  it  is  used  to  control  a  process. It will also identify
potential  applications  and  relate  how  PLC  control  compares with
traditional  methods  of control. A discussion of the benefits of  PLC
control will follow.

Objective training Programmable Logic Controller Using Siemens S7- 400 *Sertificate by Siemens* offline

PLC  Training is designed to instruct electrical control professionals
on  how  to  successfully  integrate  a  PLC  into  actual  day-to-day
industial  electrical  processes.  It not only deals with the hardware
and  software, but all the surrounding systems that must be compatible
to achieve a safe and reliable control system.
PLC  Training  is  also designed to help delegates keep abreast of the
latest  Siemens’s  PLC  technologies  and techniques available in this
area,  this  tutorial offers an excellent opportunity for delegates to
ask  specific  questions  and  exchange  ideas  relating  to their own
applications.

Hardware Configuration
This  section  will  describe  the  various  components  used  in  the
formulation  of a PLC control system for Siemens S7-400. Included will
be  methods  to  select the correct features and capabilities to match
the process requirements.
   * CPU sizes and types
   * Backplanes
   * Power supplies
   * I/O module types

Installation and Wiring Considerations training konsep plc offline

There  are  necessary  steps  that  must  be  taken to ensure that the
control  system  will  be  correctly  installed  to  provide  safe and
reliable  operation.  Installation recommendations and techniques will
be given for the following:
   * Power and grounding
   * Enclosures
   * Input devices and wiring methods
   * Output devices and wiring methods

Commissioning
This  section  will  discuss  the  methods  used and preparations that
should be made to guarantee a smooth and troublefree system start-up.

Safety Issues and Techniques
This  section  will define the major safety issues relating to control
systems.  A  number  of  techniques will be discussed to address these
issues including:
   * Solid state switching
   * E-Stops
   * Power-up delays
   * Equipment re-starting
   * Watchdog circuits
   * MCR circuits

PLC Numbering Systems
PLC  control  system  hardware  and  software  use alternate numbering
systems.  The  delegate  will be exposed to the different base systems
and how to convert to and from the decimal format.

Programming Siemens S7-400
The  delegates  will be instructed in the commands and logic necessary
to  assemble a basic PLC program to control an industrial process. The
delegate will perform a simple programming exercise.

Interactive Discussion
This  will  be  an  opportunity  for  delegates  to interact and trade
relevant stories and experiences.

Programming Software
Various  types  of  programming  software  will  be  introduced to the
delegates.  Techniques  for simple program development and downloading
will be demonstrated. Topics will include:
   * Program functions
   * Program keying and development
   * Connecting to the PLC
   * Set-up
   * Program downloading
   * Monitoring and diagnostics

Hardware  will be available so that the delegate can get some hands on
experience programming and downloading.

Structured Programming
The  concept  of  structured  and block programming will be explained.
Methods and techniques will be described which can be used to organize
and standardize PLC programs so that they can be easily understood.

Documentation Strategies
The   various   types   of   documentation   required   for  effective
installation, maintenance, and troubleshooting will be reviewed.

Programmable Logic Controller Troubleshooting
Troubleshooting  a  Programmable Logic Controller-based control system
has  its challenges and advantages. The necessary tools and techniques
required  to  perform  this  will  be  covered. The use of programming
software to monitor and diagnose process and hardware problems will be
demonstrated.

Operator Interfaces
The  various  types of operator interfaces and how they can be used to
enhance the control and diagnostic abilities of the Programmable Logic
Controller will be discussed.

Data Acquisition
Methods  of  collecting  and storing process data using the PLC s7-400
and  peripheral  computer  stations  will  be described. Advanced data
representation,  graphics,  and  calculations  using  the  computer to
enhance  the  adaptive  control  capability  of the Programmable Logic
Controller based system will also be covered.

Commissioning

This  section  will  discuss  the  methods  used and preparations that
should be made to guarantee a smooth and troublefree system start-up.

Who Should Attend
   * PLC Engineering and design personnel
   * Maintenance and technical services personnel
   * Process and operations personnel
   * Technical and process managers
   * Engineering and design personnel
   * Electrical consulting engineers
   * Electrical contractors

Metode Kursus
   * Presentation
   * Discuss
   * Case Study
   * Evaluation
   * Simulation *Laboratory/Work Shop*

Jadwal Pelatihan sinaran-training tahun 2021

12 – 13 Januari 2021

10 – 11 Februari 2021

9 – 10 Maret 2021

13 – 14 April 2021

3 – 4 Mei 2021

8 – 9 Juni 2021

13 – 14 Juli 2021

24 – 25 Agustus 2021

14 – 15 September 2021

20-21 Oktober 2021

9 – 10 November 2021

7 – 8 Desember 2021

Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan Tahun 2021

Yogyakarta, Hotel Dafam Seturan(7.300.000 IDR / participant)

Jakarta, Hotel Amaris Tendean (7.900.000 IDR / participant)

Bandung, Hotel Golden Flower (7.800.000 IDR / participant)

Bali, Hotel Ibis Kuta (8.500.000 IDR / participant)

Lombok, Hotel Jayakarta (8.750.000 IDR / participant)

Catatan

  • Waktu pelatihan Dua+1* hari dengan Biaya tersedia untuk Perorangan, Group, dan Inhouse Training, belum termasuk akomodasi/penginapan.
  • Untuk biaya dan jadwal training harap menghubungi marketing kembali

Investasi training

Investasi pelatihan selama dua hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training:

Free Penjemputan dari bandara ke hotel*.

Modul / Handout.

Flashdisk*.

Certificate of attendance.

FREE Bag or bagpacker.

Leave a Comment