TRAINING PUMP SELECTION, DESIGN AND OPERATION FOR OIL AND GAS SURFACE PRODUCTION FACILITIES

TRAINING PUMP SELECTION, DESIGN AND OPERATION FOR OIL AND GAS SURFACE PRODUCTION FACILITIES

Training Pump Selection

Training Desain Dan Operasional Profuksi Migas

OBJECTIVES :
After participate in this course, the participants will be able and capable to :
   * Understand the basic concept of oil and gas handling with surface processes and operation facilities , and how to operate pump technology in field application.
   * Diagnostic of oil and gas flow  performance under actual pumping drive mechanism and future performance with current handling processes.
   * Analyze the production flow potential of oil and gas flow under actual handling facilities system processes and to plan the better development processes according to fluid flow capacity.
   * Understand the fundamentals of microscopic and macroscopic aspects the phenomena of oil and gas handling processes and operation with given surface facilities and pumping system.

AUDIENCE:
No specified (Operator/Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE
   * Introduction to Oil and Gas Production Operation
   * Oil Surface Production Facilities
   + Well Equipments
   + Pigging System
   + Separator
   + Gas Scrubber
   + Gas Dehydarator
   + Pumps : Centrifugal, Reciprocating, Diaphragm
   * Gas Surface Processing Facilities
   + Gas Sweetening
   + Heat Exchanger
   + Fractionation, Liquefaction, Refrigeration System
   + Compressor
   * Pump Basic Theory
   + Centrifugal Pump
   + Conservation of Mass
   + Specific Velocity
   + Pump Performance
   + Cavitations
   * Pump Specification
   + Pump Specification
   + Flow Capacity
   + Fluid Properties
   + Head
   + Net Positive Heads
   + Rotation Determination and Pump Types
   + Viscous Fluid Correction
   + Material Selection
   + Prime Movers Selection
   * Pump Application
   + Pump Installation Plan
   + Pump Application Example
   * Pump Construction
   + Pump Classification by Impeller
   + Pump Classification by Casing
   + Pump Classification by Stage Number
   + Pump Classification by Axis Position
   * Pump Operation
   + Head Capacity Curve
   + Parallel and Serial Operation
   + Capacity Regulator
   + Water Hummer
   + Surging
   + Pressure Fluctuation
   + Automatic Operation
   * Pump Instalation
   + Horizontal Instalation
   + Vertical Instalation
   + Submersible Instalation
   + Pipping System
   + Vibration and Noise Protection
   * Pump Maintenance
   + First Inspection
   + Operation Condition Observation
   + Safety Instrument
   + Maintenance Management
   + Overhaul
   * Pump Trouble Shooting
   + General Trouble Shooting
   + Submersible Pump Trouble Shooting

INSTRUCTOR :
Dr. Ir. Sudjati Rachmat, DEA graduated from Petroleum Engineering Department of ITB in 1979 and got his Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France . The topic of his thesis is Modelisation Numerique d’Ecoulements Polyphasiques en Milieux Poreux Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.
For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Flu id Mechanic, Artificial Intelligence for Petroleum Engineering.
He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA, INAGA, and IGA.

Jadwal training pump selection, design and operation for oil and gas surface production facilities terbaru :

§ 23 sd 24 Januari 2019

§ 13 sd 14 Februari 2019

§ 20 sd 21 Maret 2019

§ 17 sd 18 April 2019

§ 28 sd 29 Mei 2019

§ 25 sd 26 Juni 2019

§ 16 sd 17 Juli 2019

§ 15 sd 16 Agustus 2019

§ 17 sd 18 September 2019

§ 22 sd 23 Oktober 2019

§ 20 sd 21 November 2019

§ 19 sd 20 Desember 2019

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Biaya dan Lokasi training pump selection terbaru :

Lokasi :

Yogyakarta, Hotel Dafam Malioboro (6.000.000 IDR / participant)

Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)

Bandung, Hotel Golden Flower (6.500.000 IDR / participant)

Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)

Lombok, Hotel Jayakarta (7.500.000 IDR / participant)

Catatan : Biaya diatas belum termasuk akomodasi/penginapan.

Investasi training desain dan operasional profuksi migas murah :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training pengenalan operasional produksi migas murah :

1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara) .

2. FREE Akomodasi Peserta ke tempat pelatihan .

3. Module / Handout training pump selection terupdate .

4. FREE Flashdisk .

5. Sertifikat training pump selection, design and operation for oil and gas surface production facilities terupdate .

6. FREE Bag or bagpackers (Tas Training) .

7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc) training desain dan operasional profuksi migas terbaru .

8. 2xCoffe Break & 1 Lunch, Dinner .

9. Souvenir .